Best Tonneau Cover for F-150 SuperCrew

The Ford F-150 SuperCrew is a full-size pickup truck with a rear or all-wheel drive, which holds a leading position in the category (8.6 out of 10). The truck is notable for its utility, power, and comfort, so it was just a matter of time before this vehicle has found its fans among car enthusiasts.

The look of the F-150 SuperCrew is impressive – it’s representative, functional, and comes with an increased payload, endurance, towing, comfort, and off-road abilities.

The 2020 Ford F-150 is tough, roomy, comfortable, and modern. It can boast with various driver assistance features, brand new appearance packages for XL, XLT, and Lariat trims standard 4G LTE Wi-Fi hotspot, and six powerful engines to choose from.

Four-door SuperCrew cabs are available in every trim configuration. The front independent suspension of the pickup truck is based on double wishbones, while the rear is equipped with an uncut axle with leaf springs. The SuperCrew offers 5.5-foot and 6.5-foot beds.

According to the crash-test results of the American association NHTSA, the F-150 SuperCrew Cab did not reach the maximum safety rating. Nevertheless, the truck is equipped with the anti-lock braking system (ABS), electronic dynamic stabilization system, front and side airbags.

As mentioned before, the Ford F-150 SuperCrew Cab range offers six engines, namely 3.5L EcoBoost, 3.0L Power Stroke Turbo Diesel, High-Output 3.5L EcoBoost, 2.7L Turbocharged EcoBoost, 5.0L Ti-VCT V8, and 3.3L Ti-VCT V6.

Horsepower, torque, max towing, and max. payload capacity are respectively as follows:

  • 2.7L EcoBoost – 325 hp, 400 lb-ft, 9,000 lbs., 2,470 lbs.
  • 3.5L EcoBoost – 375 hp, 470 lb-ft, 13,200 lbs., 3,230 lbs.
  • H.O. 3.5L EcoBoost – 450 hp, 510 lb-ft, 8,000 lbs., 1,200 lbs.
  • 3.3L Ti-VCT V6 – 290 hp, 265 lb-ft, 7,700 lbs., 1,990 lbs.
  • 5.0L Ti-VCT V8 – 395 hp, 400 lb-ft, 11,500 lbs., 3,270 lbs.
  • 3.0L Turbo Diesel – 250 hp, 440 lb-ft, 11,500 lbs., 2,020 lbs.

The 2020 Ford F-150 XL SuperCrew 4×2 provides a maximum tow rating of 13,200 lbs with 8000 pounds of payload if properly equipped, i.e., has a 6.5-foot bed, the Max Trailer Tow Package, and a 3.5L EcoBoost engine. Moreover, the vehicle comes with a user-friendly infotainment system.

The 2020 model can offer a 10-speed automatic transmission for all engines and expanded engine availability in lower trims. 

The load capacity is ensured by an open truck bed, which allows for the transport of various weights. But when it comes to external tuning, the first thing that often comes to mind is the body cover. It is easy to use, is in an affordable price category, protects your cargo, and looks good on a pickup truck. So why not?

PhotoProductTypeMaterialsDetails
Tyger Auto TG-BC3F1041 Tyger Auto TG-BC3F10415’5” TYGER soft tri-fold truck bed tonneau cover heavy duty 24oz marine-grade vinyl, aircraft-grade aluminum frame, stainless steel clampsView on Amazon
Gator Covers 53315 Gator Covers 533155’6” soft roll-up bed coverindustrial-grade leather-grain vinyl, aluminumView on Amazon
MaxMate TCF169029 MaxMate TCF1690295’5” soft roll-up bedheavy-duty marine-grade vinyl, aircraft-grade aluminum side rails, stainless steel clampsView on Amazon
BAK BAK448329 BAK BAK4483295’6” hard folding truck bedaircraft-grade aluminumView on Amazon
Undercover FX21019 Undercover FX210195’5″ hard folding truck bed tonneau coveraluminum panels, FRP composite materialView on Amazon
Rough Country 45515550 Rough Country 455155505’5″ hard tri-fold truck bed tonneau coveraluminum, vinylView on Amazon
RETRAX 10311 RETRAX 103115’5″ 1-piece retractable truck bed tonneau coverpolycarbonate, aluminumView on Amazon

Who Needs a Truck Bed Cover

Truck owners often think about getting a bed cover in certain situations.

Truck owners often think about getting a bed cover in certain situations.

  • If you like fishing/hunting and there’s a necessity to haul different equipment susceptible to atmospheric precipitation.
  • If you regularly have to travel from place to place. With a high-quality truck cover, you don’t have to worry about getting your things wet or covered with dust and dirt as you transport them.
  • If the truck is used for commercial purposes to deliver various goods throughout the country.

As soon as the attachment is installed, the luggage space of the pickup truck will increase several times. In addition, as mentioned before, such devices protect your cargo from rains and theft. And, of course, you get a sleek, low-profile look.

We have prepared the list of high-quality truck bed tonneau covers for Ford F-150 SuperCrew for your consideration.

As soon as the attachment is installed, the luggage space of the pickup truck will increase several times. In addition, as mentioned before, such devices protect your cargo from rains and theft. And, of course, you get a sleek, low-profile look.

We have prepared the list of high-quality truck bed tonneau covers for Ford F-150 SuperCrew for your consideration.

Best Tonneau Covers for F-150 SuperCrew

Tyger Auto TG-BC3F1041 – Best Tonneau/Bed Cover Overall

Tyger Auto TG-BC3F1041

Tyger Auto 5.5′ Black Top T3 Soft Tri-Fold Truck Tonneau Cover is durable and very easy to use. It features high-quality 24oz marine-grade vinyl, stainless steel quick-release clamps, and an aircraft-grade aluminum frame for reliability and utility. The cover also comes with a pre-set tension control and built-in crossbars. You can expect up to 15% gas economy and easy installation with no additional tools or drilling needed.

Install your new cover within 5 minutes and provide a new sleek look for your favorite truck! The TG-BC3F1041 cover model allows for 100% truck bed access and comes at a reasonable price. All installation instructions and mounting hardware are included. Check out other cool features and benefits below to find out why Tyger covers are the right choice for your F-150!

Specifications

  • 5’5” TYGER soft tri-fold truck bed tonneau cover (6.5′ bed option is also available)
  • Materials – heavy duty 24oz marine-grade vinyl, aircraft-grade aluminum frame, stainless steel clamps 
  • Model – TG-BC3F1041
  • Weight – 29 lbs
  • Vehicle fitment – 2015-2020 Ford F-150
  • Dimensions – 70.52″ x 23.91″ x 2.13″

Features

  • Easy installation (no drilling/tools, 5 minutes)
  • Superior durability
  • Pre-assembled horizontal crossbars
  • 100% bed access
  • Instructions and mounting hardware included
  • Affordable price
  • 13% gas savings on average
  • Quick-release clamps
  • Pre-set tension control
  • Built-in crossbars

Gator Covers 53315 – Best for 2015-2019 Ford F-150 SuperCrew

Gator Covers 53315

The Gator EXT Soft Roll-Up Truck Bed Tonneau Cover features industrial-grade, leather-grain vinyl and is both affordable and easy to install. It’s a perfect combination of excellent quality and price!

You can expect easy clamp-on installation (inside mount) within 30 minutes and without any additional tools as well as 100% truck bed access when you need it. At other times the cover will reliably protect your cargo in various extreme weather conditions, keeping it dry and safe. Plus, the cover hides your load from the eyes of intruders and doesn’t make any annoying noise when driving at high speeds. The fit is snug!

You have your adjustable clips for perfect tension, a piece of seal for a tailgate gap to prevent any leaks which you can also use at the front of the truck (but you will have to get another seal piece for the tailgate then), and plenty of space to haul bulky items with the closed cover.

The low profile design provides a sleek appearance for your F-150, and there’s also convenient stake pocket access. Once you have the cover, you will wonder, how come you didn’t buy it before! This cover is proudly made in the USA.

Specifications

  • 5’6” soft roll-up bed cover 
  • Model – 53315
  • Materials – industrial-grade leather-grain vinyl, aluminum
  • Weight – 24.6 lbs
  • Vehicle fitment – 2015-2019 Ford F-150

Features

  • Fast and easy clamp-on installation 
  • All mounting hardware included (inside mount)
  • Adjustable tension control
  • Heavy-duty latching 
  • Reliable truck bed protection
  • Quick and easy to open
  • 100% truck bed access
  • Low profile design
  • Stake pocket access
  • Made in the USA
  • Affordable price

MaxMate TCF169029 – Best Soft Roll-Up Bed Cover for F150 SuperCrew

MaxMate TCF169029

You will need around 15-20 minutes to install this durable dual-coated truck bed cover on your F-150. It’s a perfect choice if you like to travel and want to haul some extra cargo in your truck bed, keeping the content protected from moisture and dust.

It’s easy to install (no drilling or additional tools are needed), use, or remove if you need it to get 100% bed access. Heavy-duty cover materials feature tear-resistant, marine-grade vinyl, durable rails, built-in crossbars, aircraft-grade aluminum side rails, and stainless steel clamps. Velcro strip seals and secures with tension and latch lock system are also very convenient and reliable. You can expect gas savings of up to 13%.

All in all, this high-quality soft roll-up cover from MaxMate provides a sleek look and protection against severe weather conditions to keep your truck bed safe – all this is available at a very reasonable price. Many owners are delighted with this product’s quality and structural integrity – the cover serves them well for more than five years. You can also increase your cover’s life by lubricating it occasionally with silicone gel or spray some protective solution to keep all the sealing surfaces clean.

Specifications

  • 5’5” soft roll-up bed
  • Model – TCF169029
  • Materials – heavy-duty marine-grade vinyl, aircraft-grade aluminum side rails, stainless steel clamps
  • Vehicle fitment – 2015-2020 Ford F-150
  • Weight – 25.6 lbs
  • Instructions and mounting hardware included

Features

  • Dual-coated cover
  • Built-in horizontal crossbars for additional support
  • Heavy-duty, tear-resistant vinyl, rails, and crossbars
  • Aircraft-grade aluminum
  • Velcro strip seals
  • Easy no-drill installation
  • Gas saving benefits
  • Sleek design
  • Tension and Latching system
  • Weathertight cover
  • Full bed access
  • Low price

BAK 448329 BAKFlip MX4 – Best Hard Folding Tonneau for 2015-2020 SuperCrew

BAK BAK448329

Now, this premium hard folding truck bed cover is more expensive than all of the previous options. Still, you get superior quality in every detail, which typically costs a penny. Plus, the cover provides outstanding performance, stylish appearance, and exceptional cargo protection from theft, water, snow, and UV.

This type of bed cover has unchallenged supremacy over soft roll-up/folding covers – you can secure and haul up to 400 lbs of your evenly distributed cargo weight on it! Black matte heavy-duty sandwich panels of this hard truck bed tonneau made by first movers in the bed cover industry are made of aircraft-grade aluminum. This material provides superior durability without overweighting the whole structure. The BAKFlip MX4 was the first black-matte hard folding cover on the market and became the most popular hard folding cover in a few years.

You can expect easy clamp-on installation, effortless opening/closing of the tailgate when the cover is closed, and many years of reliable operation guaranteed by BAK Industries. You can drive with the cover fully/partially opened (from either side) without worrying about anything due to the built-in buckle system and an automatic latching mechanism.

Get full bed access in a minute by unlocking the cover via pull latches and folding it up. Besides, you also have durable drain tubes and perimeter seals to keep your cargo protected from moisture as well as shock-absorbing bumpers for your back window safety when the cover is folded. Moreover, there’s no obstruction of the third brake light!

Don’t think twice – when it comes to this manufacturer, satisfaction is guaranteed! The BAKFlip MX4 is proudly made in the USA.

Specifications

  • 5’6” hard folding truck bed
  • Model – BAK448329
  • Materials – aircraft-grade aluminum
  • Weight – 71 lbs
  • Weight capacity – 400 lbs
  • Vehicle fitment – 2015-2020 Ford F-150

Features

  • Superior durability
  • Easy clamp-on installation (no drilling)
  • Oustanding cargo protection from snow, dirt, theft, and sun
  • Heavy-duty sandwich panels
  • Lightweight but reliable construction
  • Protective seals, shock-absorbing bumpers, and dual drain tubes 
  • Made in the USA

Undercover Flex FX21019 – Best 2017 F150 SuperCrew Bed Cover

Undercover FX21019

The Flex from Undercover represents a stylish low profile design with a glossy black finish of exquisite quality. The elegant, tri-fold cover is really well-made and highly recommended by many F-150 owners in the US. It features sturdy aluminum side rails, rigid aluminum panels, an easy-to-use latch mechanism, and impressive weatherproof mounting hardware. It’s watertight and 100% secure, and you will not find a single drop of water in your truck bed, so there’s no need to worry about your cargo safety.

The Flex was designed to provide exceptional protection for your truck bed and its contents. The cover maintains its strength, style, and durability over many years of outstanding operation. You can open and close your truck’s tailgate without having to open the cover itself, which becomes a convenient feature in the long run.

The Flex comes with one pair of rails, the highly weather-, fade-, and scratch-resistant LINE-X folding cover, two suitable drain tubes, and all the hardware needed for a tight snug. You will only need a 0.5″ wrench (or socket) and scissors to install it. This tri-fold, locking cover also comes with left and right specific rails that have been pre-assembled for your comfort. Like the previous models, this cover is also proudly made in the USA.

Specifications

  • 5’5″ hard folding truck bed tonneau cover
  • Model – FX21019
  • Material – aluminum panels, FRP composite material
  • Weight – 50 lbs
  • Weight capacity – 300 lbs (not designed for carrying anything on top)
  • Vehicle fitment – 2015-2020 Ford F-150

Features

  • Full-perimeter seals for cargo protection
  • Easy installation and use
  • Durable aluminum panels
  • Automatic-latching system
  • Can be opened from both sides of the truck
  • Convenient pull cables on the sides for easy release
  • Dual-action tailgate seal (for effortless shutting the tailgate without cover lift)
  • 100% bed access
  • Extreme functionality
  • Gloss black finish
  • Watertight design
  • Made in the USA
  • User-friendly US-based customer support

Rough Country Hard Tri-Fold Cover (45515550) – Best for 2016 F150 SuperCrew

Rough Country Hard Tri-Fold Cover (45515550)

The hard folding flush tri-fold cover from Rough Country is engineered exceptionally well and is ready for any thunderstorms and heavy rains. It will save your truck bed and contents from water, debris, or physical damage. The cover was designed to exceed expectations of truck owners and represent great price/quality value. It’s easy to install, use, and it merely fits your F-150’s bed like a glove.

The 5’5″ bed cover features high-quality, marine-grade vinyl, 6061 aircraft-grade aluminum panels, and a thick high-density seal piece to provide proper security with the locked tailgate. The top is scratch-, fade-, and water-resistant. You can expect easy clamp-on installation within 5 minutes without any additional tools due to the patented quick clamp system.

The secure clamp system prevents theft or accidental opening when the tailgate is closed. The cover is mounted tightly on the sides of the bed and ultimately prevents the ingress of moisture when closed.

When unfolded, the cover allows hauling 1.5 times more of cargo in a truck bed than when the cover is closed. It’s compact and relatively lightweight (52 lbs), which allows for easy installation on your own. This cover not only pays for itself in practical terms by keeping the bed of your pickup truck from damage but also saves on fuel consumption by changing the aerodynamics. The payback period is two years, on average.

All in all, it’s a convenient accessory, which directly impacts the condition of your truck bed. Strictly black, made without unnecessary folding mechanisms, the cover is harmoniously combined with your favorite F-150 SuperCrew.

Specifications

  • 5’5″ hard tri-fold truck bed tonneau cover
  • Model – 45515550
  • Materials – aluminum, vinyl
  • Weight – 52 lbs
  • Vehicle fitment – 2015-2020 Ford F-150

Features

  • High-quality construction
  • 6061 aircraft-grade aluminum panels 
  • Marine-grade black vinyl
  • Flush mount, low profile
  • Superior security with a locked tailgate
  • Inside bed rails
  • Easy 5-minute clamp-on installation with no additional tools
  • Patented quick clamp system

RETRAX 10311 – Best Retractable Bed Cover for F150 SuperCrew

RETRAX 10311

This high-quality 1-piece retractable truck bed cover is manufactured from polycarbonate and can be locked in any position with a key. The construction features a durable thermoplastic material which is also known as LEXAN.

The canister that comes with the assembly features a unique spiral track system for preventing contact with the cover. It lays flush and maintains a smooth appearance and firm seal to keep your truck’s bed content dry and safe. Moreover, you will not find any hinges, springs, joints, or other complicated mechanisms that can trap dust and accumulate dirt.

The construction of the impact-resistible RetraxONE from Retrax is designed to retract effortlessly using sealed ball-bearing rollers, which are mounted onto the aluminum support beams and stay functional in and after any adverse weather conditions.

The RetraxONE truck bed cover can withstand temperatures from -50 to 200F without any maintenance, jamming, freezing, or other failures. With this cover, you can expect up to 10% improved mileage, protection from UV and fading, and exceptional cargo safety. A matte finish option is also available.

Specifications

  • 5’5″ 1-piece retractable truck bed tonneau cover
  • Model – 10311
  • Materials – polycarbonate, aluminum
  • Weight – 70 lbs
  • Vehicle fitment – 2004-2008 Ford F-150 SuperCrew & Super Cab

Features

  • Easy operation due to sealed ball bearings
  • Low-profile design
  • Flush canister
  • Key-lockable in any position
  • Rugged cargo protection
  • Easy clamp-on installation
  • Up to 10% improved mileage
  • 100% stake pocket access
  • One-piece construction with no joints or hinges 
  • No trapped dust or dirt accumulation
  • Rigid polycarbonate construction
  • UV, fading protection
  • Superior hauling flexibility
  • No maintenance needed
  • Aluminum support beams

Why Do You Need a Truck Cover


A truck bed cover reliably protects your vehicle’s bed from harmful weather events, physical damage, and trespassing attempts. In addition, it also improves the following aspects:

  • Vehicle attractiveness;
  • Aerodynamic functions (especially noticeable when traveling off-road or at high speeds);
  • Usefulness and utility;
  • Cargo protection from intruders and thieves.

Truck bed covers are often made from aluminum (hard folding/retractable covers) or high-quality vinyl (soft tri-fold/roll-up covers). Aluminum covers allow you to haul quite large loads above them, e.g., dirt bikes, scooters, or even quads. Soft covers can be easier to handle, but their durability is not as reliable as with hard covers. Plus, you can’t haul anything on them. Truck bed covers are supposed to protect your truck bed from dirt, water, and theft, thus ensuring safe transportation.


How to Choose a Truck Bed Cover?


Before you start choosing your bed cover, make sure you know what will be hauled in the bed. If it’s something bulky, you will need a model that can withstand a massive load from above.

Just like choosing brake pads, exhaust, air filter, or any other aftermarket part, choose a bed cover for your F-150 with extreme caution. There are many nuances to consider like reliable protection, secure fitment, airtightness, tailgate blocking, locking mechanism complexity, spare parts for the cover (shock absorbers, hinges, latches, panels, locks, gaskets, seals, etc.), durability (scratch-, fading-, vibration-, or water-resistance), weight capacity, disassembly procedure complexity, etc. Make the right choice!

When choosing a truck bed cover, opt for proven manufacturers unless you want your bed cover to fade under the sun or deform during to frost impacts. That’s how you make its service life long enough.

We hope that you were able to find a perfect truck bed cover that not only fulfills its primary purpose but also fits your F-150 SuperCrew design in the best possible way. 


FAQ


What’s the best tonneau cover for F-150?

Depending on your goals and needs, the BAKFlip MX4 hard folding truck bed cover is highly popular among F-150 owners. You can also opt for the Gator ETX if you need a soft rolling cover.

Will a F-250 tonneau cover fit F-150?

No. The F-150’s and F-250’s have different truck bed sizes – 5’5″/6’5″ for F-150 and 6’75” for F-250.

How do you open the cover on Ford F-150?

It depends on the cover model. Some hard truck bed covers have pull cables, which are accessible after you open the tailgate. Then you just have to fold the aluminum/plastic panels one by one partially or entirely all the way up to the front of the bed and secure them using straps and latches. Some retractable hard truck bed covers can be slide-open/closed effortlessly using a handle.

And sometimes, after opening the tailgate, you will have to pull a little tab at the edge of the cover to unlock the mechanism and roll up the tarp or pull up each side of the cover separately (soft covers). It’s nothing complicated at all and anyone can do that.

About the author

Jeff Glucker

Jeff Glucker is a longtime editor and columnist at MechanicFAQ.com. He’s a proud Delaware native and currently lives in Wilmington. When he’s not writing about cars, he’s driving them. And when he’s not driving them, he’s probably doing something else like spending time with his wife or yelling on his children because you need to do that too. You can follow him on Twitter @JGlucker

Leave a Comment